Last Update - April 2020

To get started you will have to download the appropriate software file onto a clean USB Stick.  Click Here.  This RSE USB zip file contains the new channel list software for your RSE WHDTV.

As there is different software for the 19", 24" and 32" WHDTV versions please ensure that you have downloaded the appropriate size and model to match your TV.

After downloading the appropriate file '', you have to extract it.  To do this find the zip file and right click using your mouse and select the 'Extract Here' or similar option, please note this may vary depending on what programs your computer has installed.  Once extracted you now have to copy the Import folder onto a clean USB stick and following the instructions below.  See picture below for reference.

The USB port is located on the side of the TV and is marked USB.

To load the software into the TV

1.  Insert the USB stick into the USB port at the side of the TV.

2.  Turn the TV on and wait until you have an operating channel.

3.  Press MENU on the remote.

4.  Scroll down to Import Flash Clone and press OK.  Press only ONCE and wait.

5.  TV will turn off automatically and turn ON again.

6.  Remove USB Stick

Your Update channel files are now loaded. 

Please note this software defaults the LNB setting to 10750, if you are using a Dome or other type of dish with an 11300 LNB you will need to change this setting.  This adjustment is pin code protected, please contact us on 0800 639 822 for this pin code.

A matching channel list can also be downloaded on the link below.


View PDF

Index Previous Next